Projects: Unterschied zwischen den Versionen
Dl8rds (Diskussion | Beiträge) |
Dl8rds (Diskussion | Beiträge) |
||
| Zeile 104: | Zeile 104: | ||
== [[10 MBit Amateur Radio Data Link]] == | == [[10 MBit Amateur Radio Data Link]] == | ||
| + | |||
| + | == [[Video Streaming DB0MHB]] == | ||
Version vom 8. März 2009, 04:36 Uhr
Wer alle seine Ziele erreicht, hat sie wahrscheinlich zu niedrig gewählt. If you meet all your goals, you have probably chosen too easy ones. (Herbert von Karajan)
Inhaltsverzeichnis
- 1 Finished Projects
- 1.1 Building a Linux Ubuntu package of TheLinkBox
- 1.2 Building a Linux Ubuntu package of EchoLinux
- 1.3 Setting up my TS-790A for Packet Radio
- 1.4 Buiding a Linux Ubuntu package of libjournaline
- 1.5 A MAX232 level shifter
- 1.6 Tests and operational report of a GAP Titan
- 1.7 Flashing OpenWRT to the WRTSL54GS
- 1.8 Building a Linux Ubuntu package of DREAM
- 1.9 Flashing OpenWRT to the ASUS WL500gP
- 1.10 Driving an external USB soundcard from OpenWRT
- 1.11 Controlling the Kenwood TS-450SAT through a Transceiver Interface
- 1.12 Turn a Fonera router into a link station
- 1.13 WLAN and Amateur Radio
- 2 Ongoing Projects
- 3 Planned Projects and Ideas
1 Finished Projects
1.1 Building a Linux Ubuntu package of TheLinkBox
Status: ready
1.2 Building a Linux Ubuntu package of EchoLinux
Status: ready
1.3 Setting up my TS-790A for Packet Radio
Status: ready
1.4 Buiding a Linux Ubuntu package of libjournaline
Status: ready
1.5 A MAX232 level shifter
Status: ready
1.6 Tests and operational report of a GAP Titan
Status: ready
1.7 Flashing OpenWRT to the WRTSL54GS
Status: ready
1.8 Building a Linux Ubuntu package of DREAM
Status: ready
1.9 Flashing OpenWRT to the ASUS WL500gP
Status: ready
1.10 Driving an external USB soundcard from OpenWRT
Status: ready
1.11 Controlling the Kenwood TS-450SAT through a Transceiver Interface
Status: ready
1.12 Turn a Fonera router into a link station
Status: ready
1.13 WLAN and Amateur Radio
Status: ready (only compiling an overview)
2 Ongoing Projects
2.1 Setting up a remote, electrically independent, low power EchoLink relay
Status: ongoing
2.1.1 Building a Linux Ubuntu package of TheLinkBox
Status: ready
2.1.2 Compiling a TheLinkBox package for OpenWRT
Status: ongoing
2.2 KLog Analysis and Enhancements
Status: ongoing
2.3 Try out FDMDV using Rigblaster
Status: building connections
2.4 Upgrade an ASUS WL-500gP to control my RIG
Status: ongoing
2.4.1 Compiling a Hamlib package for OpenWRT
Status: ongoing
2.4.2 Using the ASUS WL-500gP as a APRS digi
Status: ready
2.4.3 Switching power over IP
Status: Ongoing
2.4.4 Porting SVXLink to OpenWRT
Status: Ongoing
2.5 Setting up an IP link over radio
2.5.1 Setting up a 70cm AX25 based IP link
Status: ongoing
2.5.2 Setting up a WIFI link between DL8RDS and DB0MHB
Status: ongoing
2.5.3 Constructing a case and a GUI control for the T7F
Status: ongoing
3 Planned Projects and Ideas
3.1 Transmission of DRM signals on Amateur Radio Frequencies
Status: planned
I intend to demonstrate that it is possible for a HAM operator to produce a usable DRM signal. See here: Digital Radio Mondiale
3.2 Receiving DRM signals with the TS-930S
Status: planned
The TS-930S has a 100 KHz ZF which is meant to feed a band scope. This means it must be broad enough to provide a good capture for the 9 KHz broad DRM signal. I intend to construct a down converter to 12 KHz,in order to feed the NF signal into a soundcard and to decode it there.
3.3 Android - Hacking my Cellphone
Status: planned
http://www.openhandsetalliance.com - or: Android. An open source mobile phone operating system
