Connections between the MAX232 Level Shifter and the WRTSL54GS: Unterschied zwischen den Versionen

Aktuelle Version vom 12. April 2008, 16:03 Uhr

Here's a documentation of the pins on the WRTSL54GS board:

I managed to access the serial port using a MAX232 level shifter.

On the WRT side the pin numbering is top down. On the picture below it is from right to left.

On the WRT side --> MAX232 side
Pin 1 (3.3V) --> +12V
Pin 2 (TX) --> TxD
Pin 3 (RX) --> RxD
Pin 5 (GND) --> GND

@@ Zeile 2: / Zeile 2: @@
 * http://wiki.openwrt.org/OpenWrtDocs/Hardware/Linksys/WRTSL54GS
+I managed to access the serial port using [[A MAX232 level shifter|a MAX232 level shifter]].
+On the WRT side the pin numbering is top down. On the picture below it is from right to left.
   On the WRT side --> MAX232 side
@@ Zeile 8: / Zeile 12: @@
   Pin 3 (RX) --> RxD
   Pin 5 (GND) --> GND
+[[Image:WRTSL54GS_MAX232.jpg|400px]]