Connections between the MAX232 Level Shifter and the WRTSL54GS: Unterschied zwischen den Versionen

Aus DL8RDS Wiki
Wechseln zu: Navigation, Suche
(New page: On the WRT side --> MAX232 side Pin 1 (3.3V) --> +12V Pin 2 (TX) --> TxD Pin 3 (RX) --> RxD Pin 5 (GND) --> GND)
 
 
(4 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 1: Zeile 1:
−
On the WRT side --> MAX232 side
+
Here's a documentation of the pins on the WRTSL54GS board:
−
Pin 1 (3.3V) --> +12V
+
 
−
Pin 2 (TX) --> TxD
+
* http://wiki.openwrt.org/OpenWrtDocs/Hardware/Linksys/WRTSL54GS
−
Pin 3 (RX) --> RxD
+
 
−
Pin 5 (GND) --> GND
+
I managed to access the serial port using [[A MAX232 level shifter|a MAX232 level shifter]].
 +
 
 +
On the WRT side the pin numbering is top down. On the picture below it is from right to left.
 +
 
 +
On the WRT side --> MAX232 side
 +
Pin 1 (3.3V) --> +12V
 +
Pin 2 (TX) --> TxD
 +
Pin 3 (RX) --> RxD
 +
Pin 5 (GND) --> GND
 +
 
 +
[[Image:WRTSL54GS_MAX232.jpg|400px]]

Aktuelle Version vom 12. April 2008, 16:03 Uhr

Here's a documentation of the pins on the WRTSL54GS board:

I managed to access the serial port using a MAX232 level shifter.

On the WRT side the pin numbering is top down. On the picture below it is from right to left. 

On the WRT side --> MAX232 side
Pin 1 (3.3V) --> +12V
Pin 2 (TX) --> TxD
Pin 3 (RX) --> RxD
Pin 5 (GND) --> GND

WRTSL54GS MAX232.jpg

Abgerufen von „http://www.dl8rds.de/index.php?title=Connections_between_the_MAX232_Level_Shifter_and_the_WRTSL54GS&oldid=340“