Cisco Linksys WRTSL54GS: Unterschied zwischen den Versionen
Aus DL8RDS Wiki
Dl8rds (Diskussion | Beiträge) (→OS) |
Dl8rds (Diskussion | Beiträge) |
||
(Eine dazwischenliegende Version desselben Benutzers wird nicht angezeigt) | |||
Zeile 20: | Zeile 20: | ||
* [ftp://ftp.linksys.com/opensourcecode/wrtsl54gs/ GPL'd codebase for the firmware] | * [ftp://ftp.linksys.com/opensourcecode/wrtsl54gs/ GPL'd codebase for the firmware] | ||
* DD-WRT support: unrestricted support | * DD-WRT support: unrestricted support | ||
+ | * | ||
== Planned hacks and experiments == | == Planned hacks and experiments == | ||
Zeile 28: | Zeile 29: | ||
* Getting EchoLink to run on the Linksys, working through the afore mentioned soundcard, driving my [[Standard C-408]] | * Getting EchoLink to run on the Linksys, working through the afore mentioned soundcard, driving my [[Standard C-408]] | ||
* Providing connectivity to DB0MHB through regular WLAN. | * Providing connectivity to DB0MHB through regular WLAN. | ||
+ | |||
+ | == Experiment reports == | ||
+ | * With [[A MAX232 level shifter]] I managed to obtain a root shell, giving me the [[WRTSL54GS Boot Log]]. | ||
+ | * [[Flashing OpenWRT to the WRTSL54GS]] | ||
== Links == | == Links == |
Aktuelle Version vom 6. April 2008, 00:01 Uhr
The Cisco Linksys WRTSL54GS serves as an embedded control system using very little energy.
Inhaltsverzeichnis
1 Hardware Properties
- Hardware Type: Broadcom
- Costs: ~ 70 Euro
- CPU: BCM4704, 266 MHz
- RAM: 32 MB
- Flash RAM: 8 MB
- Antenna Connector: fixed, antenna cable soldered onto board
- Ethernet ports: 4
- MiniPCI slot: no
- Serial ports: 2, one with console; on-board soldering points; no sockets
- Power input: 12V, 1A (power supply values)
- Dimensions (mm): 140 x 140 x 27
- USB ports: 1
- Producer Product Website: [1]
2 OS
- Original Cisco Linksys Firmware
- GPL'd codebase for the firmware
- DD-WRT support: unrestricted support
3 Planned hacks and experiments
- How to set up DD-WRT on a Linksys WRT54GS
- Serial port: pins
- A serial port which can steer my TNC2H
- Driving an external USB soundcard
- Getting EchoLink to run on the Linksys, working through the afore mentioned soundcard, driving my Standard C-408
- Providing connectivity to DB0MHB through regular WLAN.
4 Experiment reports
- With A MAX232 level shifter I managed to obtain a root shell, giving me the WRTSL54GS Boot Log.
- Flashing OpenWRT to the WRTSL54GS
5 Links
- WLAN and Amateur Radio - General ressources
- mods from OE5GHN
- Another serial port project
- A serial adapter for the Linksys WRT
- Autopsy of a WRTSL54GS
- A card reader for the Linksys
- Using a Cisco Linksys for all sorts of experiments
- Modifying frequencies and transposing the Linksys into the 13cm Amateur Radio bands