Controlling the Kenwood TS-870 with HAMLIB and rigctl
Aus DL8RDS Wiki
1 Scope
This is just a notepad so that I don't forget things. Machinery that is used here:
- Kenwood TS-870S
- Microham USB Interface III
- Raspberry Pi
- libhamlib2 version 1.2.15.3-2+b1
2 Findings
This works:
rigctl -m 210 --rig-file=/dev/ttyUSB0 --ptt-file=/dev/ttyUSB0 --serial-speed=9600 --set-conf=rts_state="OFF",dtr_state="OFF"