Playing with Filters: Unterschied zwischen den Versionen
Dl8rds (Diskussion | Beiträge) (→Measurement setup) |
Dl8rds (Diskussion | Beiträge) (→Measurement setup) |
||
Zeile 23: | Zeile 23: | ||
[[image:2019-01-19-bandpass3.jpg|400px]] | [[image:2019-01-19-bandpass3.jpg|400px]] | ||
− | == Measurement setup == | + | == Building the Filter and Measurement setup == |
[[image:2019-01-19-bandpass4.jpg|400px]] | [[image:2019-01-19-bandpass4.jpg|400px]] |
Version vom 20. Januar 2019, 00:23 Uhr
Inhaltsverzeichnis
1 Scope
Well, the title of this page is "Playing with Filters". This is meant literally. So I just wanted to play around a little with my HAMEG HMS-3010 and see how I could build a bandpass and how to understand the steepness of the flanks.
The background was an idea to construct a bandpass for the frequency range mainly between 1090 MHz (ADS-B) and about 1300 MHz (23 cm band). I wanted to suppress the lower signals quite effectively, and thus maybe create a filter for GPS experiments at 1575 MHz.
Here is a link to a nice page on capacitors, which may be useful for some of you:
https://www.buildcircuit.com/capacitors/
2 Filter Theory
Generally, a bandpass consists of a high pass and a low pass that play together.
In order to optimise it a little, i decided to use potentiometers, and since I did not have a 150 kOhm type, I used a fixed value 100 kOhm plus a 50 kOhm poti in series.