ASUS WL-500GP: Unterschied zwischen den Versionen

Aus DL8RDS Wiki
Wechseln zu: Navigation, Suche
Zeile 3: Zeile 3:
 
I will dedicate this device to my friends from DB0MHB and give them digital access to their systems over the internet.
 
I will dedicate this device to my friends from DB0MHB and give them digital access to their systems over the internet.
  
 +
=== Resources ===
 
* http://wiki.openwrt.org/OpenWrtDocs/Hardware/Asus/WL500GP
 
* http://wiki.openwrt.org/OpenWrtDocs/Hardware/Asus/WL500GP
 
* http://wiki.leipzig.freifunk.net/Asus_WL-500GP
 
* http://wiki.leipzig.freifunk.net/Asus_WL-500GP
 +
* http://wiki.funkfeuer.at/index.php/Asus_WL-500Gp
 +
* http://wiki.openwrt.org/OpenWrtDocs/KamikazeConfiguration
 +
* http://wiki.leipzig.freifunk.net/Kamikaze
 +
* http://downloads.openwrt.org/docs/buildroot-documentation.html
 +
* https://dev.openwrt.org/
  
 +
=== Basic installation procedure ===
 
Installing OpenWRT on it is really easy. Take a pen and hold down the restore button. Then unplug and reconnect power. Keep reset pressed until the power diode starts blinking. This is the time to start the flashing process:  
 
Installing OpenWRT on it is really easy. Take a pen and hold down the restore button. Then unplug and reconnect power. Keep reset pressed until the power diode starts blinking. This is the time to start the flashing process:  
  
Zeile 16: Zeile 23:
  
 
Then you can hack the little box to your needs.
 
Then you can hack the little box to your needs.
 +
 +
=== Compiling OpenWRT images ===
 +
This is a good link: http://forum.openwrt.org/viewtopic.php?id=15201
 +
 +
In the meantime I managed to build my own images, which is also quite simple.
 +
* Just check out the latest version of OpenWRT as described in: https://dev.openwrt.org/
 +
* Then go ('cd') into the directory openwrt/trunk, that is the latest stuff.
 +
* Check out the latest utilities. Note: You only get the descriptions, because the real code will be downloaded from the according project sites.
 +
./scripts/feeds update
 +
./scripts/feeds install -a
 +
Now you have all the utilities you will ever want to have.

Version vom 17. Juli 2008, 05:15 Uhr

Very recently I purchased this ASUS router. Compared to my Cisco Linksys WRTSL54GS it has the advantage of two USB 2.0 sockets. And I fear that my soldering pins onto the Linksys board broke some serial connections. At least I must state that the serial connection is quite unreliable meanwhile. So, next try.

I will dedicate this device to my friends from DB0MHB and give them digital access to their systems over the internet.

1 Resources

2 Basic installation procedure

Installing OpenWRT on it is really easy. Take a pen and hold down the restore button. Then unplug and reconnect power. Keep reset pressed until the power diode starts blinking. This is the time to start the flashing process: 

tftp 192.168.1.1
> binary
> trace
> put openwrt-brcm47xx-2.6-squashfs.trx

In my example, the image must reside in your current working directory. Then wait six minutes. Then powercycle the router. telnet to 192.168.1.1 and you're in. There's no passwd.

Then you can hack the little box to your needs.

3 Compiling OpenWRT images

This is a good link: http://forum.openwrt.org/viewtopic.php?id=15201

In the meantime I managed to build my own images, which is also quite simple.

  • Just check out the latest version of OpenWRT as described in: https://dev.openwrt.org/
  • Then go ('cd') into the directory openwrt/trunk, that is the latest stuff.
  • Check out the latest utilities. Note: You only get the descriptions, because the real code will be downloaded from the according project sites.
./scripts/feeds update
./scripts/feeds install -a

Now you have all the utilities you will ever want to have.

Abgerufen von „http://www.dl8rds.de/index.php?title=ASUS_WL-500GP&oldid=459“