Using the ASUS WL-500gP as a APRS digi: Unterschied zwischen den Versionen
Aus DL8RDS Wiki
Dl8rds (Diskussion | Beiträge) (New page: Very recently I have purchased a Bosch KF-166 single frequency VHF transcaiver which has been modified as a 144.800 MHz transceiver by the previous owner. He removed the tone control unit ...) |
(kein Unterschied)
|
Version vom 26. September 2008, 18:22 Uhr
Very recently I have purchased a Bosch KF-166 single frequency VHF transcaiver which has been modified as a 144.800 MHz transceiver by the previous owner. He removed the tone control unit and did some other mods so that it really only transmits on the APRS frequency. The TRX PWR is 6 watts.
Since my old TNC2Swas practically out of use for 15 years, this is a great opportunity to recycle it and turn it into a controller for APRS.
The APRS manager software will then run on my ASUS WL-500GP. There is the fabulous APRS4R project from Karlsruhe, which I want to give a try.
