Connections between the MAX232 Level Shifter and the WRTSL54GS

Here's a documentation of the pins on the WRTSL54GS board:

• http://wiki.openwrt.org/OpenWrtDocs/Hardware/Linksys/WRTSL54GS

I managed to access the serial port using a MAX232 level shifter.

On the WRT side the pin numbering is top down. On the picture below it is from right to left.

On the WRT side --> MAX232 side
Pin 1 (3.3V) --> +12V
Pin 2 (TX) --> TxD
Pin 3 (RX) --> RxD
Pin 5 (GND) --> GND