8 Port Passive PoE Injector, Managed and Fused: Unterschied zwischen den Versionen
Aus DL8RDS Wiki
Dl8rds (Diskussion | Beiträge) (Die Seite wurde neu angelegt: „== Project Scope == My parents' house is widely equipped with Mikrotik routers and other passive PoE powered hardware. So a centralized power distrution seems…“) |
Dl8rds (Diskussion | Beiträge) |
||
| Zeile 6: | Zeile 6: | ||
So I wanted to have a PoE injector that has a per-port fuse. I was not ale to find such a device on the market, so I built it myself. | So I wanted to have a PoE injector that has a per-port fuse. I was not ale to find such a device on the market, so I built it myself. | ||
| + | |||
| + | Additional features: | ||
| + | * Web Interface | ||
| + | ** Current port switching status | ||
| + | ** Fuse status | ||
| + | * Syslog interface | ||
| + | ** Switching events | ||
| + | ** Fuse falure events | ||
| + | * External powering (24V) from UPS / Battery | ||
== Component List == | == Component List == | ||
Version vom 14. September 2017, 14:49 Uhr
1 Project Scope
My parents' house is widely equipped with Mikrotik routers and other passive PoE powered hardware. So a centralized power distrution seems reasonable. However, passive PoE injectors like the one from Intellinet have one considerable problem:
They use a powerful PSU, capable of delivering a high current to a single port in case of a short circuit on the cable, inevitably causing a fire.
So I wanted to have a PoE injector that has a per-port fuse. I was not ale to find such a device on the market, so I built it myself.
Additional features:
- Web Interface
- Current port switching status
- Fuse status
- Syslog interface
- Switching events
- Fuse falure events
- External powering (24V) from UPS / Battery
